5-Stage Reverse Osmosis Water Filter, Sydney

Pure Plus+
Reverse Osmosis Filter

Sydney's most popular under-sink RO system. Five-stage reverse osmosis with alkaline remineralisation removes fluoride, chloramine, heavy metals and microplastics, then adds minerals back for a clean, naturally balanced taste. Supplied and installed by Jean-Paul, Sydney's licensed water filter plumber.

★★★★★ 5.0 Google Rating · 6 verified reviews
Installation Included Lifetime Workmanship Guarantee 12-Month System Warranty Licensed Plumber 461511C WaterMark & NSF Certified
5.0 Google Rating
9 verified reviews
Licensed & Insured
Lic. 461511C NSW
WaterMark & NSF Certified
Australian standard systems
Fixed Price Guaranteed
No upsells on the day
Lifetime Warranty
On all workmanship
Model GT1-26-5 · 5-Stage RO + Alkaline

Pure Plus+ Water Filter

Sydney's most popular reverse osmosis system. Five stages of precision filtration remove up to 99% of dissolved contaminants, then the alkaline stage adds beneficial minerals back for fresh, balanced water on demand.

$840
Supply + professional installation. Fixed price, no call-out fees, no surprises.
Chrome filter tap included
12L tank included
$180/yr DIY
  • Removes up to 99% of dissolved contaminants
  • Fluoride reduction up to 98% via RO membrane
  • Removes chloramine, heavy metals & microplastics
  • Alkaline remineralisation, pH 8–9.5, magnesium added back
  • 50 GPD Asprinn RO membrane (NSF/ANSI 58 tested)
  • 12L storage tank, water available on demand
  • WaterMark certified to AS 3497:2021 (Cert. 23247)

Tap Options

A dedicated chrome filter tap is installed as standard, through your benchtop or sink. Prefer a cleaner look? A 3-way mixer tap upgrade is available on request, combining hot/cold and filtered water into one premium fixture. No extra hole required.

About The System

Bottled-Water Purity From Your Kitchen Tap

Sydney's mains water is treated and safe by regulatory standards, but it arrives at your tap containing chloramine, fluoride, trace heavy metals, and in some areas nitrates and PFAS. For households that cook, brew coffee, and drink directly from the tap every day, reverse osmosis is the most comprehensive solution available for residential use.

The Pure Plus+ uses a 50 GPD Asprinn RO membrane to reject up to 98% of dissolved solids at the molecular level, including fluoride (up to 98%), chloramine, lead, copper, arsenic, nitrates, PFAS and microplastics. What passes through the membrane is near-pure water. Stages 1 and 2 pre-treat the feed water to protect the membrane. Stage 4, the alkaline magnesium cartridge, adds magnesium back and raises the pH to 8–9.5. Stage 5 is a final coconut carbon polish that leaves the water with a clean, naturally sweet finish.

The 12-litre storage tank ensures water is always available on demand, no waiting for filtration to complete before you can fill a glass. The dedicated chrome filter tap is installed through your benchtop, and a 3-way mixer tap upgrade is available if you'd prefer one fixture over two.

Jean-Paul installs every Pure Plus+ system personally across Sydney. He's a licensed NSW plumber (Lic. 461511C), not a subcontractor, every installation is done by the same person who answers the phone. Fixed price of $840 covers system, tank, chrome filter tap, all fittings, and licensed installation. No hidden extras.

High Performance Filtration Filter Systems Australia
Genuine HPF & FSA Technology

This system uses High Performance Filtration (HPF) filter cartridges and Filter Systems Australia (FSA) system housings, Australian-owned brands, Gold Coast QLD. Jean-Paul is Sydney's authorised installer for both brands.

Filter Stage Breakdown

Five stages work in sequence to deliver near-pure, alkaline remineralised water. Each stage has a specific role, from protecting the membrane to polishing the final output.

1
5 micron polyspun sediment pre-filter cartridge for the Pure Plus 5-stage reverse osmosis system, 10 x 2.5 inch
GT2-2K
5-Micron Polyspun Sediment Filter
Pre-filter, Sediment, Particles, Silt
The first stage is a 5-micron melt-blown polypropylene sediment cartridge that removes physical particles from the feed water, sand, silt, rust, and suspended solids. Its primary job is to protect the carbon pre-filter and RO membrane from clogging, extending their life and maintaining flow performance. Replaced every 6 months.
SedimentSiltRust particlesMembrane protection
2
5 micron coconut carbon block CTO pre-filter cartridge for the Pure Plus reverse osmosis system, 10 x 2.5 inch
GT4-7CTO
5-Micron Coconut Carbon Block (CTO)
Pre-filter, Chlorine, VOCs, Taste & Odour
A high-grade activated coconut carbon block that adsorbs free chlorine before the water reaches the RO membrane, chlorine is particularly damaging to the membrane, so this stage protects your most expensive filter. It also captures VOCs, herbicides, pesticides, and the chemical compounds behind off-taste and odour. Replaced every 6 months.
ChlorineVOCsTaste & odourMembrane protection
3
Asprinn 50 GPD reverse osmosis membrane element for the Pure Plus undersink RO system
GT36-59
50 GPD Reverse Osmosis Membrane
Primary filter, 0.0001 micron, up to 98% reduction
The heart of the system. The Asprinn thin-film composite RO membrane filters down to 0.0001 micron, fine enough to reject the vast majority of dissolved contaminants, fluoride (up to 98%), lead, copper, arsenic, nitrates, PFAS, salts, bacteria and cysts. It produces up to 190 litres of purified water per day; the dissolved solids are flushed to drain. Replaced every 1–4 years depending on your water quality.
FluorideHeavy metalsNitratesPFASBacteria
4
Xstream alkaline magnesium remineralisation post-filter cartridge GT6-0 for the Pure Plus RO system
GT6-0
Alkaline Magnesium Remineralisation
Post-filter, pH 8–9.5, magnesium added
Straight off the membrane, RO water is mineral-stripped and slightly acidic. This Xstream Alkaline cartridge passes it through pure magnesium oxide mineral media, lifting the pH into a healthy alkaline range (around 9.5 when new, settling near 8 over its life) and adding magnesium back for a smooth, naturally fresh taste rather than flat water. Replaced every 12 months.
Alkaline pHMagnesiumRemineralisedSmooth taste
5
Xstream granular activated coconut carbon final polish post-filter cartridge GT6-11 for the Pure Plus RO system
GT6-11
Coconut Carbon Final Polish
Post-filter, Final taste & odour polish
The final stage is an Xstream Carbon cartridge of 100% granular activated coconut carbon, fitted after the alkaline mineral stage. It gives the water one last polish, stripping any residual tastes and odours and imparting the clean, naturally sweet finish you notice at the tap. Replaced every 12 months.
Taste polishOdour removalCoconut carbonFinal stage
System Specifications

Technical Specifications

Full technical data for the Pure Plus+ GT1-26-5 system as supplied and installed in Sydney.

SpecificationValue
System ModelGT1-26-5 (Pure Plus+)
Filtration Stages5 (Sediment + CTO Carbon + RO Membrane + Alkaline Mineral + Carbon Polish)
RO Membrane Output50 GPD (up to approximately 190 litres/day)
RO Membrane TypeAsprinn thin-film composite (TFC), 0.0001 micron
TDS RejectionUp to 98%
Fluoride ReductionUp to 98%
Output pH8–9.5 (alkaline magnesium stage, highest when new)
Storage Tank CapacityApproximately 12L
Pre-filter Service IntervalEvery 6 months (sediment + CTO carbon)
RO Membrane Service Interval1–4 years (water-quality dependent)
Post-filter Service Interval12 months (alkaline + carbon polish)
WaterMark CertificationCertificate No. 23247 (AS 3497:2021)
ManufacturerHigh Performance Filtration (HPF)
Supply StandardMains / town water only
Annual Service (professional)$380/yr (includes labour + all filters)
Annual Service (DIY)$180/yr cartridges
Pre-Filter Service (every 6 months)$220 professional / $70 DIY
Licensed Plumber

Installed by Jean-Paul

Every Pure Plus+ is installed by Jean-Paul Barbar, a licensed plumber, not a contractor. Neat, clean work across homes and apartments throughout Sydney.

Fixed Pricing

What You Pay

No call-out fees. No hidden extras. System, tank, chrome tap, all fittings, and licensed installation, one fixed price.

Annual Service, Professional
$380/yr
Jean-Paul attends, replaces all annual cartridges and checks all fittings. Pre-filter service runs $220 every 6 months.
  • Sediment + CTO carbon pre-filters replaced
  • Post carbon + alkaline post-filters replaced
  • All connections checked and pressure-tested
  • System flushed and performance confirmed
Annual Service, DIY
$180/yr
Replace annual cartridges yourself. Pre-filter and membrane swap every 6 months is an extra cost.
  • Standard push-fit pre/post filter cartridges
  • No specialist tools required for pre/post filters
  • RO membrane: book a service call every 2–3 yrs
  • Lowest ongoing cost for confident DIYers
Common Questions

Frequently Asked Questions

Yes. Reverse osmosis is one of the only residential filtration technologies proven to reduce fluoride effectively, removing up to 98% in a properly maintained system. Standard carbon filters and most other filter types cannot remove fluoride, which is a dissolved ion that passes through most media. The RO membrane in the Pure Plus+ operates at 0.0001 microns, which is fine enough to reject fluoride ions along with most other dissolved solids.
A standard 5-stage reverse osmosis installation typically takes around 2 hours. Jean-Paul connects the system to your cold water supply, mounts the storage tank, drills a dedicated hole in your benchtop for the filter tap, and runs the drain line to your waste pipe. He walks you through the system before leaving, including how to change cartridges and when to schedule the next service.
Pure reverse osmosis water is highly purified but slightly acidic (pH ~6) and stripped of dissolved minerals. The alkaline remineralisation stage passes water through pure magnesium oxide mineral media to raise the pH to around 8–9.5 and reintroduce magnesium. The result is clean RO-grade water that tastes naturally fresh and smooth rather than flat, similar in character to premium bottled water.
RO systems do produce some wastewater, typically 2–4 litres of drain water per litre of filtered output. This is an inherent characteristic of the reverse osmosis process. In practice for a typical Sydney household drawing 3–5 litres per day from the filter tap, the additional water usage is modest. If water efficiency is a priority, the Pure Compact's tankless design achieves a better waste ratio than traditional tank-style RO systems.
Pre-filter cartridges (sediment and carbon block) are recommended every 6 months to protect the RO membrane. 4 main cartridges are replaced annually. The RO membrane lasts 2 to 4 years and is checked at every service. Jean-Paul's annual service is $380 including all annual cartridges and labour, or DIY annual cartridges are $180 per year. Pre-filter service every 6 months is $220 professional or $70 DIY.
RO systems use a storage tank to maintain consistent pressure at the filter tap. The typical flow rate is around 1.5–2 litres per minute, enough to fill a glass in seconds and a pot in under a minute. The 12L storage tank in the Pure Plus+ ensures water is always available on demand without waiting for filtration to complete.
Yes, RO water is used as primary drinking water by millions of households worldwide and is widely regarded as among the safest available. The concern about mineral removal is addressed in the Pure Plus+ by the alkaline remineralisation stage, which reintroduces magnesium. A balanced diet provides far more mineral intake than tap water regardless, the remineralisation stage simply ensures the water doesn't taste flat.
A 5-stage RO system removes a broad spectrum of contaminants. The RO membrane (0.0001 microns) rejects up to 98% of dissolved solids including fluoride (up to 98%), chloramine, chlorine, heavy metals (lead, copper, arsenic), nitrates, PFAS, microplastics, bacteria, and cysts. The carbon stages target VOCs, chemical taste and odour, and protect the membrane. The alkaline stage replenishes beneficial minerals for a balanced pH output.
Compare Systems

Other Water Filter Systems

Not sure if the Pure Plus+ is right for you? Browse the full range, every system includes professional installation by Jean-Paul.

Pure Essential
$550
Twin-stage carbon filter. Removes chloramine, chlorine and VOCs. Full mains pressure, no RO required. Entry-level solution for Sydney mains water.
View Pure Essential
Pure Premium
$1,180
7-stage RO + alkaline + magnesium + hydrogen-rich + far infrared ceramic. The ultimate under-sink water experience, antioxidant, high-pH, and mineral-rich.
View Pure Premium
Pure Home
$3,150
Whole-house HPF-3 system. Filters every tap, shower and appliance in the home. Complete protection for families wanting clean water from every outlet.
View Pure Home
View All 7 Systems

Ready to Get Cleaner Water?

Book your Pure Plus+ installation or get a fixed price quote. Jean-Paul covers greater Sydney, same week appointments available.

0430 546 749
Mon–Sat 7am–6pm · No call-out fee · Fixed price
Request a Free Quote